PAIR / EVAP Delete
| As this is my track
bike build I am going to delete the PAIR System and the
EVAP system entirely. This
will be done in 2 stages: The first stage is the EVAP
canister that directly under the rider seat and just
under the back of the fuel tank. Once everything is removed you get
a pile just like this:
Unless you have
specifically flashed the ECU to remove the requirements
for the EVAP system you must leave the Solenoid plugged
into the Harness. If you
are going to remove the small line then you must also
follow it from solenoid up to the throttle bodies and cap
the adapter that branches out into 4 more lines
PAIR DELETE COMING SOON
|
