For the Sportbike Enthusiast that has everything.

Already have the best of everything on your bike, but want that extra
little over the top mod that the pros use?

Well we've got it!

Shock Bearings

As a shock spring compresses it rotates & since it is pressed directly up against the collar & under tension there is a lot of friction generated

These bearings help to remove that friction.

Each set of 2 races & one bearing is approx. 1/8" thick


This mod is not for everyone. The bearing & races are made from steel & WILL RUST!!! Excessive oiling or grease will obviously attract dirt & debris reducing the effectiveness of the bearing. Having said all that bearings work very well especially on shocks with longer springs like the RC51 & FZ-09 to help create a much more linear travel of the shock rate.

Extra care would need to be taken to insure these parts stay in good working conditon & I simply cannot condone this mod for streetbikes that are ridden in all weather conditions or riders that don't work on their bikes regularly etc...


$25 per set

Contact Kyle Racing for Sales